10g fugew/ no drilling

[Joe Fish]

How can I turn my 10g into a fuge without drilling. I ended up starting up my 10g again this time with salt water. I put my marco in there until I get my fuge fixed. Then I realized it would make a great fuge because it already had all the equipment I needed. Although, I have no way of drilling the glass. Has anyone done this before w/out drilling it?

 

[kevin4052002]

Why not get a plastic tub of some sort that amounts to whatever space you have available. Plastic would be much safer to drill, and it could be done without a diamond bit.

 

[S.Reef]

Have to be a little mmore specific, do you have a sump? If so what size? would you want the fuge under the stand or off the top of the tank. IMO it will b pretty hard to make a fuge without drilling because if it gravity fed you will need an outgoing outlet.

 

[KahluaZzZ]

why not buy a 10g for 9$ and try to drill it ? Hey if it breaks you won't cry.
I drilled mine with a dremmel and not even with the glass cutter, just a sanding stone and it worked. Just don't press hard on the glass, and when the glass is getting hot you spray a little warm water on it...just to cool it a bit. Perfecto ones are the best : they're so thin compared to Hagen.