Diy cpu fan help

[saltwater4life]

Hey guys,
I'm buying 2 of these Vantec Stealth 80mm Fan Model SF8025L fans but i never got a straght anwser on what plug i need to run those... So i was hoping someone here could give me a link or something.
Thank you

 

[JWright]

It tells you right on that page...

They draw 0.1A @ 12vdc

~JW

 

[CoolWaters]

its pretty simple really. u just need to find the positive wire (usually red sometimes yellow) and the negative is almost always black (i think i saw green before).

now for the power supply u should get a universal AC adapter. (dont go to radio shack they rip u off)

a universal AC adapter is really cool since u can change the voltage from 3-12v. and if u run the fan at lower volts its very quiet.

 

[saltwater4life]

I seen that but i was told there was other stuff you had to worry about... So just any power suppy that is higher then that will work?

 

[JWright]

Pretty much, yeah...

 

[saltwater4life]

Alright so this will work
COBY CA-33 UNIVERSAL 110/220V AC POWER ADAPTER

 

[JWright]

It'll take some wire strippers, and some heat shrink to make it pretty.

Oh, and if yer gonna wire them both to the same power supply (which you would have plenty of room to do, since that power supply will run up to half an amp), don't wire them up in series

~JW

 

[saltwater4life]

Alright i found a kit with everything a little cheaper then buying everything myself with shipping from two places...
I'll remember this for later