I recently decided to go topless on my 12dx, so I now have a 12dx hood with the 3.24 Nanocustoms Lighting Upgrade, this was only used for about 3 weeks. The full description of the upgrade I did is below.
1 x Nanocustoms 3.24 for 12g DX (72w)
Kit Included:
1 - Nanocustoms 3 x 24w Heat Shield
1 - Fulham Workhorse 3C Ballast - 24w
1 - BJB GX11 Lampholder prewired to Remote Ballast Lead
1 - BJB Bulb Clip
1 - AC Powercord
1 - Power Switch
1 - Bulb Clip
1 - Hole Plug
- Moonlight Option: NVM Fix & Power Adapter
- AC Adapter: 12v/500mA AC Adapter
- Bulb 1 Type: Actinic Blue
Additionally I swapped out the fans and put in higher powered stealth fans.
My asking price is $70 obo. I am willing to ship the item, but you may pick it up locally if you would like to. I am in Lancaster, CA.
I have posted pictures below. If you have any questions please feel free to PM me.
In the picture above, the discoloration on the ballast is from the flash of the camera.
1 x Nanocustoms 3.24 for 12g DX (72w)
Kit Included:
1 - Nanocustoms 3 x 24w Heat Shield
1 - Fulham Workhorse 3C Ballast - 24w
1 - BJB GX11 Lampholder prewired to Remote Ballast Lead
1 - BJB Bulb Clip
1 - AC Powercord
1 - Power Switch
1 - Bulb Clip
1 - Hole Plug
- Moonlight Option: NVM Fix & Power Adapter
- AC Adapter: 12v/500mA AC Adapter
- Bulb 1 Type: Actinic Blue
Additionally I swapped out the fans and put in higher powered stealth fans.
My asking price is $70 obo. I am willing to ship the item, but you may pick it up locally if you would like to. I am in Lancaster, CA.
I have posted pictures below. If you have any questions please feel free to PM me.
In the picture above, the discoloration on the ballast is from the flash of the camera.