I did a w/c today because I didn't want to risk algae, since I've been using ferts. There were a lot of decaying leaves on both the filter intakes, so I removed all of that, and anything else I found. Prior to my w/c, the ammonia was 2ppm (although it could've very well still been 4ppm, those colors are so close together). Immediately after my w/c, I did a full set of tests, to see how it would affect my water parameters after water changes (did about a 50% w/c). Ammonia was at 1ppm (I kinda figured it would be), Nitrite was .5ppm, Nitrates were 10ppm, pH rose up to 6.8 (as opposed to 6ppm due to the amazonia and co2).
Anywho, I decided to test the ammonia levels again to see if they went back up again b/c of the aquasoil, and they were still 1ppm. I'm guessing all that decaying matter I pulled out is the reason my cycle appeared to be taking so long. I'm going to wait till tomorrow morning to test again, just to verify my results.